Monday, April 6, 2020
International Trade as a Significant Issue in International Political Economy
Introduction There are a number of economic issues which have to be evaluated by different scientists and philosophers in order to identify how it is possible to improve living conditions as well as introduce the most effective steps in the chosen field.Advertising We will write a custom term paper sample on International Trade as a Significant Issue in International Political Economy specifically for you for only $16.05 $11/page Learn More The idea of international relations is widely spread nowadays and provides the representatives of various countries with the possibilities to define their skills and promote services through the whole world. International trade is one of the main components under which international relations may be based. There are many writers who share their knowledge and ideas about the development of international relations, and each author achieves good results in the chosen activities. In this paper, two different books will be analyzed in order to define weak and strong sides of international politics of trade and comprehend what may influence the trade process in different countries. The Politics of International Economic Relations is the book by Joan E. Spero and Jeffrey A. Hart about the peculiarities of the politics in current world economy. With the help of this book, it is possible to understand how globalization promotes international relations and how developing nations may achieve the desirable success. Another book chosen for evaluation is written by Syed J. Maswood. International Political Economy and Globalization is the source of information about different trade issues and financial stability that is crucially important for different nations. International trade is the way of how nations have to exchange different services, goods, and products. In order to select the right and, what is more important, effective way, it is necessary to have appropriate theoretical background and access to cu rrent changes and existed demands. International trade is a complex issue in political economy that requires certain attention and evaluation: there are many historical events which influence the development of this industry like World War II and Great Depression, however, the appropriate promotion of the WTO and the GATT has a number of positive aspects which are properly discussed by Maswood, Spero, and Hart. International Political Economy as a Discipline to Analyze the Relations between Countries International political economy, also known as IPE, appeared not long time ago. During the 1970s, there was a need of investigations among the existed economic foundations in order to comprehend the reasons of world oil crisis in 1973 and breakdown of one of the most popular monetary order known as the Bretton Woods system according to which monetary relations with different nations could be developed.Advertising Looking for term paper on international relations? Let's see if we ca n help you! Get your first paper with 15% OFF Learn More However, the Bretton Woods system was not perfect and could not cope with a number of problems which challenged the vast majority of European countries (Spero and Hart 15), this is why businessmen as well as philosophers and researchers found it very important to promote the discipline the purpose of which would be the evaluation of current economic conditions and identification of political, legal, and even philosophical factors. The relations between countries may be properly developed only in case all members are aware of special standards and ready to meet the demands and perform the functions set. Maswood calls international trade as the ââ¬Å"source of dynamism and developmentâ⬠(21) that is characterized by a number of benefits and alternatives. The presence of alternatives makes this exchange of goods dependent on various outside factors like globalization, political conditions, and legal implementations . In case one country undergoes some challenges and problems in the above-mentioned spheres, international trade could not be supported any more until appropriate solutions are found. And the discipline called international political economy aims at studying international relations taking into consideration such aspects of political economy like buying and selling in terms of law, government, custom, and so on. Maswoodââ¬â¢s achievements as well as Spero and Hart cooperation contributes considerably the field of international economic relations One of the most successful attempts to evaluate international economic relations is made by Spero and Hart. Within a short period of time, international political economy has become a prominent field within the frames of which problems connected to a dollar or other currencies and challenges with international trade are discussed. Economic growth based on technological innovations promotes fast development of international trade. Trade pol icy is the question evaluated by domestic politics constantly, this is why it usually ââ¬Å"determined prosperity or adversityâ⬠and considered to be the ââ¬Å"subject of frequent and often highly charged domestic political conflictâ⬠(Spero and Hart 72). To find the most effective way to solve the conflicts, professionals offer a number of rules and regulations which have to be imposed on international traded and decrease the level of controversies appeared day by day. The process of international trade lies into the fact that goods are transported across several boundaries and have to be bartered. One of the most successful examples of international trade line is the Silk Road that is supported by the European and Asian representatives. Information offered in the other source by Maswood helps to comprehend how international trade has been developed through times and which improvements have been implemented. In fact, international trade has been regulated by bilateral t reaties between the nations which were going to exchange the goods or services.Advertising We will write a custom term paper sample on International Trade as a Significant Issue in International Political Economy specifically for you for only $16.05 $11/page Learn More Due to some uncertainties or inabilities inherent to mercantilists, the vast majority of nations restricted the development of international trade or set too high tariffs. ââ¬Å"Mercantilists viewed international trade as a zero-sum activity and, consequently, emphasized the importance of trade controls to benefit the national economyâ⬠(Maswood 21). Fortunately, at the beginning of the 19th century, the representatives of British government made a decision to support the idea of international trade and, as a result, the agricultural Britain turned out to be the industrial country with a variety of opportunities. This growth in the sphere of manufacturing promoted many new possibili ties which lead to the fact that ââ¬Å"consumption of manufactured goods had high income elasticityâ⬠(Maswood 23). In other words, the ideas offered by the authors under consideration have a number of common ideas as well as differences which supplement each other: if Spero and Hart focus on past achievements and factors which predetermine the current situation in international trade, Maswood, in his turn, evaluates the achievements of modern political economy in different countries. The key country of Spero and Hart is the United States of America with their rich history and achievements, and Maswood writes more about Great Britain and its primary steps on the field of international trade. Current Changes on Political Arena That Influence International Relations and International Trade Political, economic, and social factors define the way of how different countries may promote the idea of international trade as a significant part of business. Still, there were many historic al events which deprived tradesmen of the opportunities to develop relations and create appropriate conditions for their activities. The World War II provided the United States of America with a chance to ask its allies commitments for freeing of international trade that served as a basis for ââ¬Å"a postwar international commercial orderâ⬠(Spero and Hart 73). This is why nowadays, the Unites States of America is the country with properly developed trade system and clearly defined partners. This sphere of business helps to meet the needs of citizens as well as share services and goods with other countries. The USA took a significant leadership role with such countries like Japan, France, Russia, and some more European countries.Advertising Looking for term paper on international relations? Let's see if we can help you! Get your first paper with 15% OFF Learn More In spite of the fact that nowadays European countries and Japan demonstrated successful achievements in international trade and the results of American trade system decrease considerably, Americans still perform the functions of the leaders and do not find it necessary to lose their positions. Due to the US firms which dominate in the computing industry (Spero and Hart 111), American tradesmen are able to evaluate various spheres of life and define the demands of citizens in regard to their interests. Maswoodââ¬â¢s book helps to identify the most crucial steps in the development of international trade and attempts of different countries to dictate their own conditions and rules. Various improvements have been observed in the first half of the 20th century: Italy increased tariffs for the representatives from France and the United States of America in the middle of 1930; Canada wanted to take as much as possible from its American neighbours in 1930; and Australia did not different iate countries but increased general tariffs at the beginning of the 1930 (Maswood 26). The results of such changes made some countries reject some partnerships, and some countries got a chance to earn a lot. In 2005, it was stated that the value of world merchandise trade was about $1,2 trillion. These achievements are rather promising, this is why the vast majority of restrictions in the past are justified by the author. World Trade Organization as an Attempt to Liberalize International Trade For each country, it was crucially important to establish the rules and standards which could be optimal for all members of international trade, still, numerous attempts were not as successful as they expected to be. Maswood defines a World Trade Organization as ââ¬Å"an important step toward minimizing the de-liberalization of international tradeâ⬠(43). The ideas offered by Spero and Hart are similar to those offered by Maswood, still, these authors admit that such international organ ization should help to supervise trade between the participating countries. In fact, the role of World Trade Organization is huge indeed; after it replaced the General Agreement on Tariffs and Trade, also known as the GATT, in 1995, the conditions under which countries had to exchange services and goods improved considerably. On the one hand, this organization is responsible for negotiations and formulations of trade agreements between different countries taking into consideration the demands and requirements of all sides on new bases. On the other hand, in both books, it is admitted that the conditions of WTO agreements and work focus on derive from past agreements offered by UR (Uruguay Round) and the GATT. This is why in order to comprehend how the WTO may work and what conditions are considered, it is better to evaluate past achievements in the chosen sphere, evaluate each organization separately, and compare the WTO with them. Spero and Hart identify three organizations as â⠬Å"cornerstones of international economic governanceâ⬠(2). They are the World Bank that was created to facilitate the process of recovery after the war, the International Monetary Fund (IMF) that clearly defined the functions of international trade and tradesmen, and the GATT that aimed at establishing the principles for multilateral traffic negotiations. In comparison to Maswood who define the last organization the most favourable and effective means to promote international trade, Spero and Hart seem to be more passionate with the World Bank and the possibilities offered. Actually, the World Bank supported only developing countries so that they could have leveraged loans and use them for capital programs. The main purpose of the World Bank was always to reduce the level of poverty and help all countries achieve the same success. However, the existed inequality is one of the key promoters of trade: those who do not have something have to do something in order to earn and reac h the desirable goal. And those countries that are rich in some particular production can sale good and services and increase incomes. In its turn, the International Monetary Fund set the purpose to stabilize international exchange rates and encourage liberalising economic policies by means of enforcement. So, it may be observed that all trade organizations had the same purpose ââ¬â to improve the conditions of international trade; still, the methods differed considerably, this is why it was obligatory to implement one system that could meet the needs of both developed and developing counties because of personal desire. In the books under analysis, the authors underline how successful and well-timed the World Trade Organization was at the first day of 1995. International trade would be incomplete without the conditions offered by the World Trade Organization. The point is that the WTO does not predict possible outcomes of the activities; but what the organization decides to do i s to formulate a number of principles in accordance with which trading countries have to work. One of the most effective principles is the idea of non-discrimination. It means that each country has the right to develop the relations with other countries on the same basics. There is no need to identify one country that deserves special attention and tariffs, and another country due to its low financial position should undergo different trading conditions. This is why all WTO members have the same rights, possibilities to be improved and developed. The same attitude is observed with the services and goods which are sold. Import production should be treated the same way domestic products are treated: all technical and security standards should be met in accordance with the requirements mentioned in the agreement. Globalization as a Significant Factor in International Trade The issue of globalization is considered to be an important aspect to take care of. For example, it is stated that globalization is the main reason of why more markets for goods and services have to be open, why multiple distribution should be provided by all businessmen, and why global markets need to be available 24/7 (Spero and Hart 8). Of course, technological progress supports the process of globalization, still, it is not always possible for all people to get used to the new improvements and innovations. The vast majority of developing countries admit that globalization is the process that creates a number of disadvantages: the examples are numerous labour mobility challenges and investment capital that is repatriated by workers. In spite of the fact that governments try to assist the workers to adapt to a globalizing economy by means of retraining or special education, this support is always enough for the required professional level. Another aspect of globalization in countries which are not adapted for innovations is constantly increasing losses: people have to pay more money to get an idea on how to overcome globalization and comprehend the demands which are set by time and fashion. This is why to meet the conditions introduced by the WTO and be a worthwhile trading member, it is very important to get an appropriate level of knowledge, find financial support, and evaluate the conditions under which trade may be developed. Improvements in the Field of International Trade In the current world, there are many aspects which have to be reformatted and improved considerably, and one of them is international trade. Taking into consideration that there are a number of rules and policies which have to evaluated by all tradesmen, it is very important to formulate them so that each member of international trade is satisfied. Nowadays, there are many methods of how international trade may be organized, this is why it seems to be not that difficult to decide on the steps which should be chosen. First, controversies around the World Trade Organization should be solved. It is said that the WTO that is based on democratic principles offered by the GATT does not introduce itself as a pure democratic organization that tries to meet the interests of all member countries. What is more important, the WTO is now recognized as the instigator of the trade that is managed by corporations. Public interest is not taken into account, however, enough attention is paid to large organizations which have money and want to have more. This is why nowadays, the WTO has more opponents as all those workers and consumers who were waiting for some help and support became upset with the conditions they have to work under. There are many debates on how it is possible to improve the situation and return a true essence of the WTO and its possibilities. The authors of the books under analysis suggest the government to take control over the activities and evaluate the public opinion with the help of which international trade continues developing and improving. It is necessary to reme mber that international trade is based on ordinary people who create production, provide services, and perform the role of contributors. This is why it is wrong to neglect their opinions and demands just in order to earn money and take leading positions in some particular sphere. Conclusion The two books chosen for the analysis in this paper are considered to be interesting and educative sources. With the help of Maswoodââ¬â¢s International Political Economy and Globalization, the reader is able to understand how different countries promote international trade and achieve appropriate results in their activities. Attention to the process of globalization makes the reader comprehend how challenging innovations could be for ordinary people as well as for professional tradesmen. Spero and Hart introduce another powerful source called The Politics of International Economic Relations that supplements the ideas offered by the previous writer. International relations are complex, and the re are many objectives which should be considered to understand a true nature of international trade. This is why it seems to be rather effective to evaluate the past of political economy and international trade in particular and define how it is possible to improve the present and future conditions. Works Cited Maswood, Syed, J. International Political Economy and Globalization. Hackensack, NJ: World Scientific, 2008. Spero, Joan, E. and Hart, Jeffrey, A. The Politics of International Economic Relations. Boston, MA: Cengage Learning, 2009. This term paper on International Trade as a Significant Issue in International Political Economy was written and submitted by user Terrance Fleming to help you with your own studies. You are free to use it for research and reference purposes in order to write your own paper; however, you must cite it accordingly. You can donate your paper here.
Sunday, March 8, 2020
Proper Language and Sentence Structure for Academic Writing by Lauren Gartner
Proper Language and Sentence Structure for Academic Writing Proper Language and Sentence Structure for Academic Writing Academic writing is the form of writing that students and others in the world of academia use to communicate their knowledge and informed opinions on a variety of subjects. Academic writing is by definition objective, evidence based, accurate, and written from an impersonal point of view. Notes about the Academic Writing Style The style that you will use to write academic papers is much different than the style that you would use for personal or business communication. For example, when writing in an academic setting, you would never use contractions. You would also never use slang, jargon, or colloquialisms. The rules of academic writing also require that you avoid filler words, vague words (thing, a lot, more), and phrases that can be replaced with one word. Sexist language should also be avoided. Use police officer instead of police man. Avoid using first person pronouns or gender based pronouns. Use they or their instead of he or she. Writing in the second person (you) is also expressly forbidden. Avoid using filler words. Having a good vocabulary will be beneficial to you, but big words will not impress simply because they are big words. Understanding The Conventions of Academic Writing Here are a few rules that may help you to understand what is expected of you when you write a research paper or essay: Your writing should be based on solid research Your goal when writing a research paper should be expressing what the evidence proves, not manipulating evidence to support your opinion Shorter words are often the better choice than longer words Paragraphs must always have a main idea sentence Your thesis should be clear Being concise is extremely important Your papers should have an introduction, a body, and a conclusion Help With Academic Writing Now that you better understand the characteristics of academic writing, let us discuss where you can get writing help both on and off campus. If your campus has a writing center, this is a great place to go and get help with academic writing assignments. The writing center will usually be staffed with assistant instructors or upperclassmen who are willing to volunteer their time to assist you. In some cases, your school's writing center will be internet based. In this case, you can log in to get information on various types of academic papers, rules of citation formats, and to see examples of various papers. If you need additional help, you may be able to find a tutor who can work with you one on one. A final option that many students use at least once are academic writing services. These are services that will write, edit, or proofread your academic papers for you. This is a very good option for students who are truly stuck on an assignment, and who are counting on getting a good gr ade. You can also use these services to help you to learn more about the proper structure and format of academic papers.
Friday, February 21, 2020
Why poverty should be more aware in schools Research Paper
Why poverty should be more aware in schools - Research Paper Example However, their impact varies from person to person. Sometimes people pass over this turmoil stricken stage with ease, but in some cases one observes juvenile delinquency. ââ¬Å"In 1994, police reported about 500 violent youth crime arrests for every 100,000 10-17-olds in the population. Violent youth crime then fell sharply from 1994 through 2001, before rebounding somewhat through 2008.â⬠(J.A. Butts par.4) There are several factors involved that trigger such impulsive behavior such as personal conflicts, competition, socio-economic issues. To minimize the probability of propagating juvenile delinquency among youth, it is important to provide them proper coaching, a healthy environment to develop and moral support. Studies show that children belonging to under privileged class are more prone to go astray, and get themselves involved in mischievous activities (Brooks-Gunn and Duncan 2000 p. 189). Therefore it may prove helpful to educate students about poverty and make them understand the hardship that is faced by their school fellows who do not enjoy the same economic background. ââ¬Å"In terms of achievement, the risk for poor relative to non-poor children is 2.0 times as high for grade repetition and dropping out of high school, and 1.4 times as high for having a learning disability. For other conditions and outcomes, these risk ratios are: 1.3 timesas high for parent-reported emotional or behavior problems, 3.1 times as high for a teenage out of wedlock birth, 6.8 times as high for reported cases of child abuse and neglect, and 2.2 times as high for experiencing violent crime.â⬠(Duncan and Brooks-Gunn 2000 p. 189) The only place where poor children get a chance to mingle with their rich counterparts is public schools or at most a playground. Apart from that these children spend most of their time in a much stressed environment. Poverty may not be a curse, but it is enriched in capacity to give birth to social evils. It is a driving force that
Wednesday, February 5, 2020
Research & Analysis Study of Balfour Beatty plc Business and Essay
Research & Analysis Study of Balfour Beatty plc Business and Competitive Environment - Essay Example The company made good progress in the building sector in 2006. Heery, a leading architectural, engineering and programme management business, represents Balfour Beatty's business interests in USA. Balfour Beatty's Civil and Specialist Engineering and Services division, with revenues of 1,920m and 10,455 employees, specializes in engineering, design and management services provider in civil, transport, energy and water sectors in UK, USA, Hong Kong and Middle East. It has a leading market presence in specialised engineering services like overhead transmission lines, gas and water utility contracting and in road management and maintenance resulting in profit from operations tripled to 49m in 2005. The company with strong orders and a number of large contracts under their belt gained growth momentum in 2006 in the engineering sector. Balfour Beatty's Rail Engineering and Services division, with revenues of 766m and 5,922 employees, specializes in designing, constructing, equipping, maintaining and renewal of rail assets and systems in UK, USA, Germany, Italy and Portugal. The profit from operations in these services fell by 27% to 32m in 2005. This was a result of full year without maintenance and tighter market in UK and some losses in the US. 2006 saw some progress due to increase in efficiency and improving project volume in London Underground, Germany and Italy. Balfour Beatty Rail Inc has been restructured into a single organisation, headquartered in Jacksonville, Florida, USA. The organisation has shown substantial growth in recent years with strategic acquisitions in the US and Germany. Balfour Beatty's Investments and Developments division, with revenues of 465m and only 136 employees promotes, manages and invests in privately funded infrastructure projects and developments in selected sectors in the UK and overseas, through its operating company Balfour Beatty Capital, established in 1997. Balfour Beatty's is currently conducting PPP/PFI projects in two principal sectors such as infrastructure (comprising transportation, power and waste water treatment) and accommodation (including health and education). It showed 20m profit from operations in 2005. Balfour Beatty's Other Service Segments Balfour Beatty holds 20% share in the Metronet consortium, a 30-year PPP project responsible for upgrading and maintaining two thirds of London Underground's infrastructure like trains, stations, signalling, track, tunnels and bridges. Balfour Beatty also has four DBFO (design-build-finance-operate) road concessions. Balfour Beatty is provider of a range of Healthcare services to major UK hospital schemes in London, Edinburgh, Durham and Blackburn providing a total of over 2,500 beds. Through Consort Healthcare, Balfour Beatty is also appointed preferred bidder for 521m PPP contracts in Birmingham Acute and Adult Psychiatric Hospitals and 250m Pinderfields and Pontefract hospitals. Balfour Beatty operates the largest grouped schools scheme in England called the Transform Schools' Stoke concession covering 98 schools since 2000. The Rotherham Schools started in 2003, was awarded "Best Community Use Project" in 2005 in the PPP/PFI Journal Awards. The Transform scheme built and maintained 21
Tuesday, January 28, 2020
Introduction To Beats Frequency Philosophy Essay
Introduction To Beats Frequency Philosophy Essay The sound of a beat frequency or beat wave is a fluctuating volume caused when you add two sound waves of slightly different frequencies together. If the frequencies of the sound waves are close enough together, you can hear a relatively slow variation in the volume of the sound. A good example of this can be heard using two tuning forks that are a few frequencies apart. A sound wave can be represented as a sine waves, and you can add sine waves of different frequencies to get a graphical representation of the waveform. When the frequencies are close together, they are enclosed in a beat envelope that modulates the amplitude or loudness of the sound. The frequency of this beat is the absolute difference of the two original frequencies Examples and applications of beat frequencies:- A good demonstration of beat frequencies can be heard in the animation below. A pure sound of 330 Hz is combined with 331 Hz to give a rather slow beat frequency of 1 Hz or 1 fluctuation in amplitude per second. When the 330 Hz sound is combined with a 340 Hz sound, you can hear the more rapid fluctuation at 10 Hz. Another example of beats:- When you fly in a passenger plane, you may often hear a fluctuating droning sound. That is a beat frequency caused by engine vibrations at two close frequencies. Application of beats:- A piano tuner will strike a key and then compare the note with a tuning fork. If the piano is slightly out of tune, he will be able to hear the beat frequency and then adjust the piano wire until it is at the same frequency as the tuning fork. If the piano is severely out of tune, it makes the job more difficult, because the beat frequency may be too fast to readily hear. Adding sine waves :- Although sound is a compression wave that travels through matter, it is more convenient to illustrate the sound wave as a transverse wave, similar to how a guitar string vibrates or how a water wave appears. The shape of such a wave for a single frequency is called a sine wave. Its fig isà ¢Ã¢â ¬Ã ¦Ã ¢Ã¢â ¬Ã ¦ in fig:- Here Sine wave represents a single frequency of sound with constant amplitude When we add sound waves traveling in the same direction together, elements of the sine wave add or subtract, according to where they are in the waveform. we add the amplitude of each wave, point by point. Making a graphical representation of the sum of two waves can be done by hand, but that can be be tedious. Beat envelope:- If we add two waves of slightly different frequencies, the resulting amplitude will vary or oscillate at a rate that is the difference between the frequencies. That beat frequency will create a beat envelope around the original sine wave. In this figure beat envelope modulates the amplitude of the sound Since the frequencies of the two sounds are so close and we would hear a sound that is an average of the two. But we would also hear the modulation of the amplitude as a beat frequency, which is the difference between the initial frequencies. fb = | f1 à ¢Ãâ ââ¬â¢ f2 | where fb is the beat frequency . f1 and f2 are the two sound frequency. | f1 à ¢Ãâ ââ¬â¢ f2 | is the absolute value or positive (+) value of the difference . Examples:- For example, if we add a wave oscillating at 445 Hz with one that is at 450 Hz, the resulting frequency will be an average of the sum of the two waves. (445 Hz + 450 Hz)/2 = 447.5 Hz. This waveform is close to a sine wave, since the frequency are almost the same. The amplitude of volume of this combination will oscillate at the beat frequency of the difference between the two: (450 Hz 445 Hz) = 5 Hz. Now, if we add 440 Hz and 500 Hz notes, the resulting waveform will be a complex version of a sine wave and will sound like a fuzzy average of the two tones. The average frequency of this complex wave will be (440 Hz + 500 Hz)/2 = 470 Hz. Also, its beat frequency will be 60 Hz, which would sound like a very low-pitched hum instead of a fluctuating volume. When two sound waves of different frequency approach your ear, the alternating constructive and destructive interference causes the sound to be alternatively soft and loud a phenomenon which is called beatingor producing beats. The beat frequency is equal to the absolute value of the difference in frequency of the two waves. -:Applications of Beats:- -:Envelope of Beat Production:- Beats are caused by the interference of two waves at the same point in space. This plot of the variation of resultant amplitude with time shows the periodic increase and decrease for two sine waves. The image below is the beat pattern produced by a London police whistle, which uses two short pipes to produce a unique three-note sound. Sum and difference frequencies Interference and Beats:- Wave interference is the phenomenon that occurs when two waves meet while traveling along the same medium. The interference of waves causes the medium to take on a shape that results from the net effect of the two individual waves upon the particles of the medium. If two upward displaced pulses having the same shape meet up with one another while traveling in opposite directions along a medium, the medium will take on the shape of an upward displaced pulse with twice the amplitude of the two interfering pulses. This type of interference is known as constructive interference. If an upward displaced pulse and a downward displaced pulse having the same shape meet up with one another while traveling in opposite directions along a medium, the two pulses will cancel each others effect upon the displacement of the medium and the medium will assume the equilibrium position. This type of interference is known as destructive interference. The diagrams below show two waves one is blue and the other is red interfering in such a way to produce a resultant shape in a medium; the resultant is shown in green. In two cases (on the left and in the middle), constructive interference occurs and in the third case (on the far right, destructive interference occurs. But how can sound waves that do not possess upward and downward displacements interfere constructively and destructively? Sound is a pressure wave that consists of compressions and rarefactions. As a compression passes through a section of a medium, it tends to pull particles together into a small region of space, thus creating a high-pressure region. And as a rarefaction passes through a section of a medium, it tends to push particles apart, thus creating a low-pressure region. The interference of sound waves causes the particles of the medium to behave in a manner that reflects the net effect of the two individual waves upon the particles. For example, if a compression (high pressure) of one wave meets up with a compression (high pressure) of a second wave at the same location in the medium, then the net effect is that that particular location will experience an even greater pressure. This is a form of constructive interference. If two rarefactions (two low-pressure disturbances) f rom two different sound waves meet up at the same location, then the net effect is that that particular location will experience an even lower pressure. This is also an example of constructive interference. Now if a particular location along the medium repeatedly experiences the interference of two compressions followed up by the interference of two rarefactions, then the two sound waves will continually reinforce each other and produce a very loud sound. The loudness of the sound is the result of the particles at that location of the medium undergoing oscillations from very high to very low pressures. As mentioned in a previous unit, locations along the medium where constructive interference continually occurs are known as anti-nodes. The animation below shows two sound waves interfering constructively in order to produce very large oscillations in pressure at a variety of anti-nodal locations. Note that compressions are labeled with a C and rarefactions are labeled with an R. Now if two sound waves interfere at a given location in such a way that the compression of one wave meets up with the rarefaction of a second wave, destructive interference results. The net effect of a compression (which pushes particles together) and a rarefaction (which pulls particles apart) upon the particles in a given region of the medium is to not even cause a displacement of the particles. The tendency of the compression to push particles together is canceled by the tendency of the rarefactions to pull particles apart; the particles would remain at their rest position as though there wasnt even a disturbance passing through them. This is a form of destructive interference. Now if a particular location along the medium repeatedly experiences the interference of a compression and rarefaction followed up by the interference of a rarefaction and a compression, then the two sound waves will continually each other and no sound is heard. The absence of sound is the result of the par ticles remaining at rest and behaving as though there were no disturbance passing through it. Amazingly, in a situation such as this, two sound waves would combine to produce no sound. location along the medium where destructive interference continually occurs are known as nodes. Two Source Sound Interference:- A popular Physics demonstration involves the interference of two sound waves from two speakers. The speakers are set approximately 1-meter apart and produced identical tones. The two sound waves traveled through the air in front of the speakers, spreading our through the room in spherical fashion. A snapshot in time of the appearance of these waves is shown in the diagram below. In the diagram, the compressions of a wavefront are represented by a thick line and the rarefactions are represented by thin lines. These two waves interfere in such a manner as to produce locations of some loud sounds and other locations of no sound. Of course the loud sounds are heard at locations where compressions meet compressions or rarefactions meet rarefactions and the no sound locations appear wherever the compressions of one of the waves meet the rarefactions of the other wave. If we were to plug one ear and turn the other ear towards the place of the speakers and then slowly walk across the room pa rallel to the plane of the speakers, then you would encounter an amazing phenomenon. we would alternatively hear loud sounds as you approached anti-nodal locations and virtually no sound as you approached nodal locations. (As would commonly be observed, the nodal locations are not true nodal locations due to reflections of sound waves off the walls. These reflections tend to fill the entire room with reflected sound. Even though the sound waves that reach the nodal locations directly from the speakers destructively interfere, other waves reflecting off the walls tend to reach that same location to produce a pressure disturbance.) Destructive interference of sound waves becomes an important issue in the design of concert halls and auditoriums. The rooms must be designed in such as way as to reduce the amount of destructive interference. Interference can occur as the result of sound from two speakers meeting at the same location as well as the result of sound from a speaker meeting with sound reflected off the walls and ceilings. If the sound arrives at a given location such that compressions meet rarefactions, then destructive interference will occur resulting in a reduction in the loudness of the sound at that location. One means of reducing the severity of destructive interference is by the design of walls, ceilings, and baffles that serve to absorb sound rather than reflect it. The destructive interference of sound waves can also be used advantageously in noise reduction systems. Earphones have been produced that can be used by factory and construction workers to reduce the noise levels on their jobs. Such earphones capture sound from the environment and use computer technology to produce a second sound wave that one-half cycle out of phase. The combination of these two sound waves within the headset will result in destructive interference and thus reduce a workers exposure to loud noise. Musical Beats and Intervals:- Interference of sound waves has widespread applications in the world of music. Music seldom consists of sound waves of a single frequency played continuously. Few music enthusiasts would be impressed by an orchestra that played music consisting of the note with a pure tone played by all instruments in the orchestra. Hearing a sound wave of 256 Hz , would become rather monotonous (both literally and figuratively). Rather, instruments are known to produce overtones when played resulting in a sound that consists of a multiple of frequencies. Such instruments are described as being rich in tone color. And even the best choirs will earn their money when two singers sing two notes i.e., produce two sound waves that are an octave apart. Music is a mixture of sound waves that typically have whole number ratios between the frequencies associated with their notes. In fact, the major distinction between music and noise is that noise consists of a mixture of frequencies whose mathematical relati onship to one another is not readily discernible. On the other hand, music consists of a mixture of frequencies that have a clear mathematical relationship between them. While it may be true that one persons music is another persons noise (e.g., your music might be thought of by your parents as being noise), a physical analysis of musical sounds reveals a mixture of sound waves that are mathematically related. To demonstrate this nature of music, lets consider one of the simplest mixtures of two different sound waves two sound waves with a 2:1 frequency ratio. This combination of waves is known as an octave. A simple sinusoidal plot of the wave pattern for two such waves is shown below. Note that the red wave has two times the frequency of the blue wave. Also observe that the interference of these two waves produces a resultant (in green) that has a periodic and repeating pattern. One might say that two sound waves that have a clear whole number ratio between their frequencies interfere to produce a wave with a regular and repeating pattern. The result is music. Another easy example of two sound waves with a clear mathematical relationship between frequencies is shown below. Note that the red wave has three-halves the frequency of the blue wave. In the music world, such waves are said to be a fifth apart and represent a popular musical interval. Observe once more that the interference of these two waves produces a resultant (in green) that has a periodic and repeating pattern. It should be said again: two sound waves that have a clear whole number ratio between their frequencies interfere to produce a wave with a regular and repeating pattern; the result is music. Finally, the diagram below illustrates the wave pattern produced by two dissonant or displeasing sounds. The diagram shows two waves interfering, but this time there is no simple mathematical relationship between their frequencies (in computer terms, one has a wavelength of 37 and the other has a wavelength 20 pixels). We observe that the pattern of the resultant is neither periodic nor repeating (at least not in the short sample of time that is shown). It is clear: if two sound waves that have no simple mathematical relationship between their frequencies interfere to produce a wave, the result will be an irregular and non-repeating pattern. This tends to be displeasing to the ear. A final application of physics to the world of music pertains to the topic of beats. Beats are the periodic and repeating fluctuations heard in the intensity of a sound when two sound waves of very similar frequencies interfere with one another. The diagram below illustrates the wave interference pattern resulting from two waves (drawn in red and blue) with very similar frequencies. A beat pattern is characterized by a wave whose amplitude is changing at a regular rate. Observe that the beat pattern (drawn in green) repeatedly oscillates from zero amplitude to a large amplitude, back to zero amplitude throughout the pattern. Points of constructive interference (C.I.) and destructive interference (D.I.) are labeled on the diagram. When constructive interference occurs between two crests or two troughs, a loud sound is heard. This corresponds to a peak on the beat pattern (drawn in green). When destructive interference between a crest and a trough occurs, no sound is heard; this corres ponds to a point of no displacement on the beat pattern. Since there is a clear relationship between the amplitude and the loudness, this beat pattern would be consistent with a wave that varies in volume at a regular rate. The beat frequency refers to the rate at which the volume is heard to be oscillating from high to low volume. For exà ¢Ã¢â ¬Ã ¦, if two complete cycles of high and low volumes are heard every second, the beat frequency is 2 Hz. The beat frequency is always equal to the difference in frequency of the two notes that interfere to produce the beats. So if two sound waves with frequencies of 256 Hz and 254 Hz are played simultaneously, a beat frequency of 2 Hz will be detected. A common physics demonstration involves producing beats using two tuning forks with very similar frequencies. If a tine on one of two identical tuning forks is wrapped with a rubber band, then that tuning forks frequency will be lowered. If both tuning forks are vibrated together, then they produce sounds with slightly different frequencies. These sounds will interfere to produce detectable beats. The human ear is capable of detecting beats with frequencies of 7 Hz and below. A piano tuner frequently utilizes the phenomenon of beats to tune a piano string. She will pluck the string and tap a tuning fork at the same time. If the two sound sources the piano string and the tuning fork produce detectable beats then their frequencies are not identical. She will then adjust the tension of the piano string and repeat the process the beats can no longer be heard. As the piano string becomes more in tune with the tuning fork, the beat frequency will be reduced and approach 0 Hz. When beats are no longer heard, the piano string is tuned to the tuning fork; that is, they play the same frequency. The process allows a piano tuner to match the strings frequency to the frequency of a standardized set of tuning forks. Important Note:- Many of the diagrams on this page represent a sound wave by a sine wave. Such a wave more closely resembles a transverse wave and may mislead people into thinking that sound is a transverse wave. Sound is not a transverse wave, but rather a longitudinal wave. Nonetheless, the variations in pressure with time take on the pattern of a sine wave and thus a sine wave is often used to represent the pressure-time features of a sound wave. Whenever two wave motions pass through a single region of a medium simultaneously, the motion of the particles in the medium will be the result of the combined disturbance due to the two waves. This effect of superposition of waves, is also known as interference. The interference of two waves with respect to space of two waves traveling in the same direction, has been described in previous section. The interference can also occur with respect to time (temporal interference) due to two waves of slightly different frequencies, travelling in the same direction. An observer will note a regular swelling and fading or waxing and waning of the sound resulting in a throbbing effect of sound called beats. Number of beats heard per second Qualitative treatment:- Suppose two tuning forks having frequencies 256 and 257 per second respectively, are sounded together. If at the beginning of a given second, they vibrate in the same phase so that the compressions (or rarefactions) of the corresponding waves reach the ear together, the sound will be reinforced . Half a second later, when one makes 128 and the otherà 128*1/2 vibrations, they are in opposite phase, i.e., the compression of one wave combines with the rarefaction of the other and tends to produce silence. At the end of one second, they are again be in the same phase and the sound is reinforced. By this time, one fork is ahead of the other by one vibration. Thus, in the resultant sound, the observer hears maximum sound at the interval of one second. Similarly, a minimum loudness is heard at an interval of one second. As we may consider a single beat to occupy the interval between two consecutive maxima or minima, the beat produced in one second in this case, is one in each second. If the two tuning forks had frequencies 256 and 258, a similar analysis would show that the number of beats will be two per second. Thus, in general, the number of beats heard per second will be equal to the difference in the frequencies of the two sound waves. Analytical treatment:- Consider two simple harmonic sound waves each of amplitude A, frequencies f1 and f2 respectively, travelling in the same direction. Let y1 and y2 represent the individual displacements of a particle in the medium, that these waves can produce. Then the resultant displacement of the particle, according to the principle of superposition will be given by Y=y1+y2 This equation represents a periodic vibration of amplitude R andà frequencyà . The amplitude and hence the intensity of the resultant wave, is a function of the time. The amplitude varies with aà frequency Since intensity (amplitude)2, the intensity of the sound is maximum in all these cases. Forà to assume the above values like 0, p, 2p, 3p, 4p,. Thus, the time interval between two maxima or the period of beats = When the difference in the frequency of the two waves is small, the variation in intensity is readily detected on listening to it. As the difference increases beyond 10 per second, it becomes increasingly difficult to distinguish them. If the difference in the frequencies reaches the audible range, an unpleasant note of low pitch called the beat note is produced. The ability to hear this beat note is largely due to the lack of linearity in the response of the ear. Demonstration of beats:- Let two tuning forks of the same frequency be fitted on suitable resonance boxes on a table, with the open ends of the boxes facing each other. Let the two tuning forks be struck with a wooden hammer. A continuous loud sound is heard. It does not rise or fall. Let a small quantity of wax be attached to a prong of one of the tuning forks.. This reduces the frequency of that tuning fork. When the two forks are sounded again beats will be heard. Uses of beats:- The phenomenon of beats is used for tuning a note to any particular frequency. The note of the desired frequency is sounded together with the note to be tuned. If there is a slight difference in frequencies, then beats are produced. When they are exactly in unison, i.e., have the same frequency, they do not produce any beats when sounded together, but produce the same number of beats with a third note of slightly different frequency. Stringed musical instruments are tuned this way. The central note of a piano is tuned to a standard value using this method. The phenomenon of beats can be used to determine the frequency of a tuning fork. Let A and B be two tuning forks of frequencies fA (known) and fB (unknown). On sounding A and B, let the number of beats produced be n. Then one of the following equations must be true. fA fB = n à ¢Ã¢â ¬Ã ¦Ã ¢Ã¢â ¬Ã ¦Ã ¢Ã¢â ¬Ã ¦Ã ¢Ã¢â ¬Ã ¦Ã ¢Ã¢â ¬Ã ¦. (i) or fB fA = n à ¢Ã¢â ¬Ã ¦Ã ¢Ã¢â ¬Ã ¦Ã ¢Ã¢â ¬Ã ¦Ã ¢Ã¢â ¬Ã ¦Ã ¢Ã¢â ¬Ã ¦. (ii) To find the correct equation, B is loaded with a little wax so that its frequency decreases. If the number of beats increases, then equation (i) is to be used. If the number of beats decreases, then equation (ii) is to be used. Thus, knowing the value of fA and the number of beats, fB can be calculated. Sometimes, beats are deliberately caused in musical instruments in a section of the orchestra to create sound of a special tonal quality. The phenomenon of beats is used in detecting dangerous gases in mines. The apparatus used for this purpose consists of two small and exactly similar pipes blown together, one by pure air from a reservoir and the other by the air in the mine. If the air in the mine contains methane, its density will be less than that of pure air. The two notes produced by the pipes will then differ in the pitch and produce beats. Thus, the presence of the dangerous gas can be detected. The super heterodyne type of radio receiver makes use of the principle of beats. The incoming radio frequency signal is mixed with an internally generated signal from a local oscillator in the receiver. The output of the mixer has a carrier frequency equal to the difference between the transmitted carrier frequency and the locally generated frequency and is called the intermediate frequency. It is amplified and passed through a detector. This system enables the intermediate frequency signal to be amplified with less distortion, greater gain and easier elimination of noise Summary:- A beat frequency is the combination of two frequencies that are very close to each other. The sound you hear will fluctuate in volume according to the difference in their frequencies. You may often hear beat frequencies when objects vibrate. Beat frequencies can be graphically shown by adding two sine waves of different frequencies. The resulting waveform is a sine wave that has an envelope of modulating amplitude.
Monday, January 20, 2020
Freedom both Digital and Literal Essay -- Censorship
With recent events such as the Megaupload shutdown and occupy protests around the globe, the internet and its current state has been receiving much attention. The internet has become an integral part of our lives, link people overseas, transmitting ideas, and propelling innovation. Because of this, governments and service providers should not regulate, restrict, or censor the internet. The Internet we know today serves as a medium for our entertainment, communication, and commercial needs. It is something many of us have come to take for granted. However, the original intended purpose of the first ââ¬Å"internetâ⬠goes back to the days of the Cold War where the ever looming threat of a nuclear missile strike prompted the U.S., as well as many other countries, to build a robust, fault-tolerant, and distributed computer network. By 1970, ARPANET had been born, funded by the Department of Defense and linking research facilities from the east coast to the west. Not until the 1990ââ¬â¢s was the internet commercialized, gaining widespread popularity and incorporated into many aspects of our lives. With 2.2 billion people connected today, problems must undoubtedly rise. However, how different groups attempt to handle these problems can be as different as day and night. There are several issues at stake here regarding regulation, including anti-piracy laws, net neutrality, and freedom of speech. The most recent of these issues concerns many pieces ââ¬Å"anti-piracyâ⬠legislation that have appeared before Congress in the United States and before the European Union. In 2010, Congress attempted to quietly pass the Combatting Infringement and Counterfeits Act. Fortunately, news quickly spread and petitions were submitted to prevent its passing. Senator Wy... ... saw."ZDNet. ZDNet, 15 Nov 2011. Web. 13 Apr 2012. "Growing Chorus of Opposition to "Stop Online Piracy Act"."Center for Democracy & Technology. N.P., 09 Jan 2012. Web. 13 Apr 2012. PROTECT IP Act of 2011, S. 968, 112th Cong. à § 3(d)(2)(D); "Text of S. 968," Govtrack.us. May 26, 2011. Retrieved June 23, 2011. "Senator: Web Censorship Bill A ââ¬ËBunker-Busting Cluster Bombââ¬â¢." Wired. (2012): 1. Web. 13 Apr. 2012. Tassi, Paul. "You Will Never Kill Piracy, and Piracy Will Never Kill You." Forbes. Forbes, 03 FEB 2012. Web. 13 Apr 2012. "BitTorrent Piracy Doesnââ¬â¢t Affect US Box Office Returns, Study Finds." Torrentfreak. N.p., 10 Feb 2012. Web. 13 Apr 2012. Suderman, Peter. "Internet Cop." Reason. 01 Mar. 2011: 20. eLibrary. Web. 13 Apr. 2012. "Background." Global Internet Freedom Consortium. 04 June 2006. Web. 15 Apr. 2012. .
Saturday, January 11, 2020
Dante Inferno
In this canto, Dante awakens to find that he is on the edge of Hell. Dante and Virgil descend into the bottomless pit. They enter the first circle of Hell, Limbo, where the souls that are sighing live. The souls include those all Unbaptized infants and those men and women who lived before the age of Christendom. I am going to talk more about those souls later. In the previous canto, Dante fainted at moments of great intensity of feeling when he is shocked by the strange sights he sees in Hell. Paralleled to his violent fainting, is he awakened by a great clasp of thunder. This supernatural ââ¬Ëweatherââ¬â¢ mirrors Danteââ¬â¢s internal condition. The faint, however, acts as to move from one location, the ferry crossing over Acheron, to Limbo. Furthermore, it seems that Dante faints only when he is not strong enough to confront sin in that he no longer faints as he continues to face greater horrors and suffering, indicating his increasing strength. We see that the period of unconsciousness has done Dante good as he ââ¬Å"stood up and turned [his] rested eyesâ⬠¦ to see what kind of place it was where [he] awokeâ⬠(4-6). Eyes are the organ of sense related to light. The eyes have the ability to absorb light and enable us to see. Therefore, they may signify reason and knowledge, which is intended to be strengthened through the Danteââ¬â¢s journey. Dante seems to be ready to face the next obstacle; however, when he looks down into the pit, he becomes reluctant, indicating that he is still far from being able to face Hell by himself. As they took the first downward movement within Inferno, Dante sees Virgilââ¬â¢s pallor of pity which he mistakes for fear as he himself had been at the end of previous canto. Virgil then answers him, ââ¬Å"the anguish of the souls who dwell down here has painted in my face the pity you have taken to be fearâ⬠(19-21). Virgil describes the world of Limbo as the ââ¬Å"blind worldâ⬠without other punishment than its darkness and ââ¬Å"thundering with the roar of endless woe. â⬠Traditional thinking, according to the apocryphal Gospel of Nicodemus, there are two limbos, which are for the souls of unbaptized children and the other for the virtuous pagans. Virgil further explains that he himself being among the former, further commenting that the only pain they suffer is that the hope of seeing God doesnââ¬â¢t exist within them. They are not punished, yet they eternally miss the supernatural joys of Heaven. Virgil continues on by saying that those souls ââ¬Å"didnââ¬â¢t sin. If they had merits, these were not enough ââ¬â baptism they didnââ¬â¢tââ¬â¢ have, the one gate to the faith which you believeâ⬠(34-6). When Dante heard Virgilââ¬â¢s saying ââ¬Å"hopeless, we live forever in desire,â⬠ââ¬Å"great sorrow seized [his] heart. â⬠It shows that Dante is responding with pity and sorrow. Caught by this statement, Dante asks if anyone has escaped and achieved Heaven. Dante continues on by saying ââ¬Å"I want to confirm the faith that conquers every path that strays,â⬠showing that he is seeking knowledge and wishing to be reassured of the Justice of God and be confirmed of what he heard about the harrowing of Hell. The real question heââ¬â¢s asking is that why should he seek confirmation of Christââ¬â¢s ascent to heaven from a pagan? Virgil answers with ââ¬Å"I had just entered in this state when I saw coming One of power and might crowned with the glorious sign of victoryâ⬠(54-55). ââ¬Å"One of power and mightâ⬠indicates Christ, in the harrowing of hell. The Harrowing of Hell indicates the event where Christ descended to Hell, and freed the souls of all those virtuous people who lived before the grace of baptism. The sign of victory can mean the cross. However, in Danteââ¬â¢s case, the virtuous souls remain in the limbo eternally. Danteââ¬â¢s question and Virgilââ¬â¢s answer doesnââ¬â¢t concern with the harrowing of hell, but rather with those who went up with Christ after the harrowing of hell. Virgil answers with list of the patriarchs and matriarchs, mentioning on Hebrews; Adam, Abel, Noah, Moses, Abraham, David, Jacob, Isaac, the sons of Jacob and Rachel. He indicates that ââ¬Å"many othersâ⬠were included, some of whom will be concerned later. The reason for this is to emphasize the conflict toward the pity. Dante and Virgil ââ¬Å"did not leave off walking while [Virgil] spoke,â⬠which reminds us of the journey in motion. This information is provided to establish the ââ¬Ërealismââ¬â¢ of the scene. As they walk through the ââ¬Å"forest thicketed with souls,â⬠Dante sees a fire which is supposed to symbolize the moral virtues, or knowledge in the light of which he describes certain honourable folk. He further questions Virgil why these honourable folk are distinguished from the other spirits by being allowed to be the light, to which Virgil replies: ââ¬Å"The honoured name that still resounds/their glory in our life above has won the grace from Heaven that now exalts them hereâ⬠(76-79). In other words, the fame which these souls possess in the world above earned them a special location in Limbo. As Dante continues throughout his journey, the recurring motif of fame is one of the most important motifs of the Inferno.
Subscribe to:
Posts (Atom)